AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateTrusted AC Installation for Pasadena Homeowners
If your system is 12 to 15 years old, running constantly to hold 76 degrees in July, or you’ve already paid for two repairs this year, a new installation usually costs less over five years than keeping the old unit alive. Pasadena’s humid Gulf summers push equipment hard, and a mismatched or undersized system never recovers that lost ground. Our technicians have up to 9 years of experience, we’re licensed and insured, and we install to the Paragon standard, which means correctly sized, correctly charged, and tested before we leave. We work on nine leading brands, so the recommendation you get is about your house, not a manufacturer we’re pushing. Paragon AC Repair offers free estimates, and we can arrange same-day service on many calls. Call (866) 982-5097 to get started. We answer 24/7, with fast dispatch from 7am to 7pm.
Furnace Installation
Furnace Installation is the replacement of the heating side of your system, and for Pasadena homeowners it’s usually a shorter, milder heating season that makes right-sizing more important than raw output. You need it when the heat exchanger has cracked, when the unit is old enough that parts get scarce, or when repair after repair has stopped making financial sense. Paragon AC Repair handles furnace installation alongside our cooling work, so you’re not calling one contractor in July and a different one in January. Typical furnace installation runs $3500-$7500 depending on size, efficiency tier, and whether venting or ducting needs changes, and the written estimate sets the final price.
Heating Side of the Same System
Most homes in Pasadena heat with a gas furnace paired to a central air handler, so installing the furnace means confirming the blower and coil match the AC you already have. We check that match before we order rather than after.
Sizing and Combustion Checks
A furnace that’s oversized short-cycles, and one that’s undersized runs cold in the few weeks each winter actually bites. We size from the home’s load and verify combustion and venting on gas units before the job is closed out.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
HVAC Installation
HVAC Installation means installing the heating and cooling system together as one matched set rather than piecing in a replacement indoor unit against an aging outdoor one. You need it when both halves are the same age and nearing the end, when a previous installer mismatched the coil and condenser, or when you’re converting to a system with an air handler that serves both seasons. Paragon AC Repair covers the full scope, so cooling and heating are one project, one company, one point of accountability. A whole-system installation typically runs $3500-$7500, with the exact figure settled by the written estimate after we see the ductwork, the electrical service, and the equipment you choose.
Matched Equipment Matters
When the indoor coil doesn’t match the condenser, capacity drops and the compressor works harder than it should. We match components because the rated efficiency number only holds when the set is designed to work together.
Ductwork Review Before Ordering
Leaky or undersized ducts quietly undo a good install, so we look at static pressure and duct condition first. Right-sizing duct work to the new equipment is part of the estimate, not a surprise line item later.
Heat Pump Installation
Heat Pump Installation is the fitting of a single system that heats and cools by moving refrigerant rather than burning fuel, and it suits Pasadena’s climate well because winters are mild and cooling is the long season. You need it when your gas furnace and AC are both near replacement, when you want to drop gas from the home, or when your existing heat pump has failed and the compressor isn’t worth saving. Paragon AC Repair installs heat pumps from Carrier, Trane, Lennox and other major makes, sized to your home and balanced for humidity control as well as temperature. Expect a typical $3500-$7500 for a standard installation, with the written estimate fixing the final price.
Heating Season Demand
Pasadena winters are short and rarely hard, which means a heat pump’s cold-weather performance is less of a limiting factor here than in northern markets. What matters more is how the system manages humidity through the long cooling season.
Refrigerant Line and Drain Care
New heat pumps need correctly sized line sets and a condensate path that won’t back up in a humid climate. We verify both before the system is commissioned.
Ductless Mini Split Installation
Ductless Mini Split Installation is the addition of one or more wall-mounted indoor heads connected to an outdoor unit, delivering conditioned air directly into a room without ducts. It’s the right call when you’re adding living space, finishing a garage conversion, cooling an upstairs room that never gets comfortable, or dealing with a house where the duct system can’t be fixed economically. Paragon AC Repair handles multi-zone designs from Goodman and other brands, sized per room, with line routing planned to keep the exterior clean. A single-zone install typically falls within our standard $3500-$7500 range, and multi-zone work is priced from the written estimate after we’ve walked the rooms.
Zoning for Additions
Every head is its own zone, so a converted garage or a rear bedroom gets set its own way. That flexibility is the main reason homeowners in Pasadena choose ductless for additions instead of extending existing duct runs.
Mounting and Line Routing
Head height, drainage slope, and where the line set exits the wall all get worked out before installation day. Planning that up front keeps the finished job tidy on the outside of the house.
AC Replacement
AC Replacement is the removal of a failed or worn-out cooling system and installation of a new condenser and coil, and you need it when the compressor has failed on an out-of-warranty unit, when R-22 refrigerant makes repairs impractical, or when repair quotes are climbing past the halfway mark of replacement cost. Paragon AC Repair recommends replacement only when the numbers actually say so, and we’ll tell you plainly when a repair still makes sense. Typical replacement in Pasadena runs $3500-$7500 depending on tonnage, efficiency tier, and whether the line set or electrical disconnect needs updating, with the written estimate setting the final number.
When Repair Stops Making Sense
A single failed capacitor is a repair. A failed compressor on an aging system is usually a replacement conversation. We walk you through the cost comparison instead of steering the answer.
Disposal and Permits
Removing the old equipment and recovering refrigerant properly is part of the job. Most cities require a permit for this work, so ask your city’s building department and we’ll coordinate what’s needed.
Central Air Conditioning Installation
Central Air Conditioning Installation is the fitting of a full ducted system: outdoor condenser, indoor coil and air handler, refrigerant lines, thermostat, and controls. You need it when you’re moving into a home that has a furnace but no cooling, when the existing ducted system has failed, or when you’re replacing both halves at once for a matched, efficient set. Paragon AC Repair installs central systems from Bryant, American Standard and the other major brands we’re certified on, sized from a load calculation rather than a square-footage guess. A standard central installation in Pasadena typically runs $3500-$7500, and the written estimate you receive sets the final price.
Load Calculation First
Guessing tonnage from square footage is how systems end up short-cycling and struggling in July humidity. We run room-by-room load calculations so the equipment matches the house.
Thermostat and Airflow Setup
After installation we commission airflow and set the thermostat to the system’s actual stage and capacity. A properly configured system delivers what the spec sheet promised.
Brands We Service
We’re certified to work on nine of the industry’s leading HVAC brands, and that range is the reason we can diagnose the system in front of us instead of the one brand we happen to sell. We service Carrier equipment and know where it wears, from the condenser fan motor to the control board. We service Trane systems and understand how their components fail in a humid cooling season. We handle Lennox units and can match their indoor coils to a new condenser instead of forcing a full changeout. We also work on Goodman, Rheem, York, Daikin, Bryant, and American Standard.
What that means for you is a straight recommendation: if your Trane condenser has life left and only the coil is bad, we’ll say so. If your Goodman air handler is the weak link, we’ll price the repair against a replacement and let you decide. Our model is brand-agnostic because your budget and your house should drive the answer. Whether you have Carrier or any other make, we can help.
See the difference
Before
After
Before
After
Before
AfterSigns You Need a Pro Right Now
- Rising electric bills with a working system. A unit that’s drawing more power month over month is often failing to hold the temperature or running on a failing compressor. That’s a signal worth diagnosing before summer peaks.
- The house won’t get below 78 in the afternoon. A system that runs continuously without reaching the set point is either undersized, low on refrigerant, or losing air through duct leaks. None of those fix themselves.
- Ice on the outdoor unit or the refrigerant line. That’s usually a refrigerant charge or airflow problem, not a sign the unit is working overtime. Running it in that state can damage the compressor.
- Rattling, grinding, or a compressor that clicks and stops. Mechanical noise points to failing bearings or a compressor on the way out. Electrical panels and capacitors can store a lethal charge, so this is not work for a homeowner.
- Water pooling around the indoor unit. A clogged drain line in Pasadena’s humidity can overflow and damage ceilings, and it often signals a coil or pan issue underneath. Get it looked at before the drywall tells the story.
Our Process, Step by Step
- 1
Conversation and site visit. We ask what’s actually bothering you about the house, then walk the equipment, the ducts, and the electrical service. That visit is what the free estimate is built on.
- 2
Load calculation and system sizing. We size the equipment to the home using room-by-room load figures, not a rule of thumb. Getting this right is the difference between a system that lasts and one that struggles.
- 3
Written options, no pressure. You get equipment options and a written price for each, with the trade-offs spelled out. We don’t sell a manufacturer relationship; we sell the right fit.
- 4
Installation day. Lines, drains, electrical, and airflow get set and verified against spec. Refrigerant charge is measured, not guessed, and duct connections are sealed and tested.
- 5
Commissioning and walkthrough. We run the system, verify temperatures and airflow, and show you the thermostat and filter routine before we leave. Any paperwork to coordinate with your insurer is handled at this stage.
How Much Does AC Installation Cost in Pasadena?
AC installation in Pasadena typically runs $3500-$7500, and a straightforward central system replacement for a single-family home usually lands in the middle of that range. The low end covers a standard-efficiency condenser and coil in a home with existing ductwork in good shape. The high end covers larger tonnage, higher-efficiency equipment, duct repairs, or a new line set and electrical work. Heat pumps and ductless systems are priced within the same typical range for standard work, and multi-zone designs run higher based on the number of heads.
What affects the price: system tonnage, efficiency tier, whether the duct system needs sealing or resizing, the condition of the electrical service at the disconnect, refrigerant line condition, and whether you’re changing fuel source. A new install in an older Pasadena home with original ducts almost always needs more than the box swap the advertised price assumes.
How to avoid overpaying: get a written estimate that breaks out equipment, labor, and any duct or electrical work separately, and make sure the equipment is sized from a load calculation rather than a guess. Ask what happens if the system doesn’t perform, and confirm who handles what if a permit is required. Most cities require a permit for this work, so ask your city’s building department before the job is scheduled.
Our free estimate includes the site visit, the load calculation, and a written price for each option. You’ll see what’s included, and you won’t be told the number will change after the crew arrives. Call (866) 982-5097 for an exact quote.
Our Service Area Near Pasadena
We work throughout Pasadena and the surrounding communities, including Deer Park, South Houston, La Porte, Galena Park, Webster, Cloverleaf, Channelview, Friendswood, and Baytown. Homes in this stretch of the Gulf coastal plain share the same heavy cooling demand and humid summers, so the sizing and humidity-control advice carries across the area. For homes in neighboring towns, ac installation is handled with the same load-first approach as in Pasadena, and we coordinate scheduling so a set install date stays a set install date. Call (866) 982-5097 and we’ll confirm availability for your address.
Serving Pasadena, TX – Our Local Coverage Area
We serve Pasadena and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions About AC Installation in Pasadena
AC installation is the removal of your existing cooling equipment and the fitting of a new condenser, indoor coil, and the electrical and refrigerant connections that support it. It includes sizing the system to your home, connecting or updating the ductwork, and commissioning the unit so it delivers its rated capacity. It’s different from a repair, which keeps existing equipment running. Call (866) 982-5097 if you’d like to know which one your situation calls for.
A standard central system replacement is usually a one-day job, and larger or more complex installations with duct work can run into a second day. Heat pump and ductless installations vary with system size and the number of zones. We’ll give you a realistic time estimate with the written quote so you can plan around it. Call (866) 982-5097 to talk through your project.
Typical AC installation in Pasadena runs $3500-$7500. The final number depends on tonnage, efficiency tier, duct condition, and any electrical or line-set work your home needs. The written estimate sets the final price, so there are no surprises after the crew arrives. Call (866) 982-5097 for a free estimate.
Yes. We’re certified to work on Carrier, Trane, Lennox, Goodman, Rheem, York, Daikin, Bryant, and American Standard equipment. That range means we can repair or replace based on your system and budget rather than a single manufacturer relationship. Call (866) 982-5097 and we’ll confirm what’s right for your equipment.
Same-day service is available on many calls, and we work Sunday through Friday. We answer 24/7, with fast dispatch from 7am to 7pm. A call outside dispatch hours is booked into the next opening. Call (866) 982-5097.
Warranty coverage comes from the equipment manufacturer plus the workmanship terms stated in your written agreement. Coverage length and terms depend on the equipment tier you choose, so we spell it out in the estimate before you commit. Ask us to walk through it line by line. Call (866) 982-5097 with questions.
Clear the area around the indoor unit and the outdoor pad, and make sure we can reach the attic access and the electrical panel. Secure pets, and plan for the house to be without cooling for a few hours during the changeover. We’ll confirm anything specific to your home when we schedule.
Schedule Your AC Installation Service in Pasadena Today
If your system is on its last summer, or you’re adding cooling to a home that never had it, we’ll size it right, price it in writing, and set a firm install date. Heating or cooling, we handle both, and one contractor covers every season. Call (866) 982-5097 for a free, no-obligation estimate. We answer 24/7, with fast dispatch from 7am to 7pm. You can also see how we approach ac installation in neighboring communities.
Written by the team at Paragon AC Repair.