AC repair
Furnace & heating
Heat pumps
Ductless mini splits
Carrier
Trane
GoodmanSeasonal tune-up and full diagnostic on your Carrier, Trane, or Goodman system - readings shown to you before any repair is proposed
Diagnosis first, numbers second - you approve the repair price before a single part goes in.
Get your free estimateWhy Pasadena Homeowners Choose Lennox HVAC
Paragon AC Repair provides independent Lennox HVAC service in Pasadena, covering repair, installation and maintenance for Lennox air conditioners, gas furnaces, heat pumps and mini-splits. What makes our Lennox work different is that we service nine major brands and diagnose the equipment in front of us instead of steering you toward one product line. We’re an independent shop and we’re not affiliated with or authorized by Lennox.
That independence matters in Pasadena. Lennox equipment shows predictable failure patterns once you’ve worked on enough of it, and knowing those patterns is what turns a repeat service call into a repair that holds. Our technicians have up to 9 years of experience on residential equipment from the major manufacturers, including Carrier and Trane.
Call (866) 982-5097. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Trust Paragon AC Repair for Your Lennox HVAC?
Lennox builds its residential lineup across a wide quality band, from builder-grade Merit furnaces to variable-speed Elite equipment and the XC and SL condenser families. Working on both ends of that range teaches you where the differences actually sit: the control strategy, the blower motor type, the pressure-switch logic on gas heating. We’ve serviced enough of it to know which symptoms point to a control fault and which point to a mechanical one.
Warranty-safe practices matter with Lennox equipment because a compressor or heat exchanger claim depends on how the system was treated. We test operating pressures, verify airflow, check electrical draw and document what we find before a part comes out. Quality parts that fit the model matter just as much, and we match them to the equipment rather than guessing. We don’t stock OEM or genuine Lennox parts, and we’re not a Lennox dealer, but we do repair, install and service the equipment.
Because we cover heating and cooling under one company, your Lennox furnace and your Lennox condenser get looked at by the same contractor. No hand-off when the season turns. Call (866) 982-5097 for a free estimate.
Styles & brands we work with
- AC repair
- Furnace & heating
- Heat pumps
- Ductless mini splits
- Carrier
- Trane
- Goodman
Common Lennox HVAC Problems We Fix in Pasadena
Lennox systems fail in recognizable ways, and Pasadena’s climate puts its own spin on each one. These are the calls we run most often:
- Inducer motor and pressure switch faults on Merit and Elite gas furnaces. A furnace that starts, runs a few minutes and shuts down mid-cycle usually isn’t a bad switch. It’s a weak inducer motor, a blocked flue or a condensate drain that isn’t draining. Gulf Coast humidity makes that drain issue common, and a technician confirms it with a manometer reading instead of swapping the switch and hoping.
- Failed run capacitors and contactors on XC-series condensers. The most common no-cool call on an older Lennox unit is the outdoor fan not spinning while the compressor tries to start. A swollen capacitor or a pitted contactor is usually behind it. Testing capacitance and line voltage before replacing the part is the difference between a fix and a callback.
- Leaking evaporator and condenser coils on early R-410A equipment. Coil leaks show up on this generation of Lennox equipment more than most owners expect, and in Pasadena they show up early. Salt-laden air off the ship channel and airborne industrial fallout attack outdoor coils fast, so rust-through and fin corrosion appear on condensers that are only a few years old. That makes the repair-or-replace decision a real one.
- Control board and ignition control faults on Elite variable-speed furnaces. Variable-speed equipment depends on communication between the board and the blower. When that breaks down you get short cycling, uneven blower speed or a furnace that locks out with no obvious cause. Board-level diagnosis takes patience and the right meter.
- Cracked heat exchangers on aging furnaces. This one is a safety issue, not a comfort issue. A cracked heat exchanger can let combustion gases into the supply air. We inspect for it, and we’ll tell you plainly when a furnace shouldn’t be run.
Here’s how these usually play out: a homeowner reports the house isn’t cooling and the outdoor fan isn’t spinning, and a qualified pro tests the capacitor before touching anything. On the heating side, a furnace tripping its pressure switch mid-cycle typically traces back to the inducer, flue or condensate drain, confirmed by measurement. Same symptoms, different systems, different answers.
Lennox Parts & Our Repair-vs-Replace Approach
On Lennox control boards, ignition controls and pressure switches, we lean toward OEM or OEM-equivalent parts. Aftermarket mismatch on those components causes repeat failures, and saving a few dollars on the wrong board costs more in the second visit. For capacitors, contactors and common wear items, universal aftermarket parts are fine and often the faster path.
The repair-or-replace question is where owners get steered. On a leaking coil or a failed compressor in an older Merit unit, the honest answer is often that replacement makes more sense than pouring money into a second major repair. On a ten-year-old system with one failing capacitor, it’s not close. We recommend based on the condition of your equipment and your budget, not on what we’d rather sell.
Call (866) 982-5097 for a free estimate. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Our Lennox Service Process – Step by Step
- 1
Diagnosis. We start at the model plate and the symptoms. On a Lennox condenser that means capacitance, line voltage and operating pressures. On a furnace it means manifold pressure, inducer performance and a drain check. We tell you what we found before we quote anything.
- 2
Repair or installation. For a repair, we match the part to the equipment. For a replacement, we size the system to the house and confirm the equipment matches your existing ductwork and electrical service. Installations are scheduled, not rushed, because Lennox equipment needs a proper match to run at rated capacity.
- 3
Test. After the repair we run the system through a full cycle and verify temperature split and airflow. An install gets a longer commissioning check, including refrigerant charge verification.
- 4
Warranty and paperwork. We explain what’s covered, what isn’t, and hand you the documentation you’ll need if a manufacturer claim ever comes up.
See the difference
Before
After
Before
After
Before
AfterLennox Products We Service & Install in Pasadena
We service the Lennox residential lineup as it actually shows up in Gulf Coast homes: Merit Series gas furnaces, Elite Series variable-speed furnaces, XC-series and SL-series air conditioners, and the heat pump and mini-split systems that are common here. That covers the equipment most Pasadena homeowners actually own.
Pasadena’s housing stock runs from 1950s through 1970s ranch and bungalow homes with original ductwork and closet-mounted air handlers to newer subdivisions on the south and west sides. Older homes with single-pane windows load the cooling side hard, so equipment sizing and duct condition matter as much as the brand on the cabinet. Call (866) 982-5097 to talk through what your Lennox system needs.
We Also Service These Brands
Paragon AC Repair works on nine of the industry’s leading HVAC brands, including Carrier, Trane, Goodman, Rheem, York, Daikin, Bryant and American Standard, alongside Lennox. If you move into a Pasadena home with a different system, or you’re comparing a Lennox replacement against another brand, we can service either one. Whatever brand you have, we know it. Heating or cooling, we handle both. Call (866) 982-5097 for a free estimate.
FAQs – Lennox HVAC Service in Pasadena
No. We’re an independent Lennox service provider and we’re not affiliated with, authorized by or endorsed by Lennox. We service Lennox equipment because we’re certified to work on nine major brands, not because of a manufacturer relationship.
Yes. We match parts to the model plate rather than guessing, and on control boards, ignition controls and pressure switches we lean toward OEM or OEM-equivalent parts to avoid repeat failures. We don’t stock OEM or genuine Lennox parts, but we source quality parts that fit the equipment.
Most Lennox repairs take one visit, and how long depends on the diagnosis. A capacitor or contactor swap on an XC-series condenser is quick. A control board fault on an Elite variable-speed furnace or a leaking coil takes longer. Installations are scheduled once the equipment is ordered and the size is confirmed.
We service and install Lennox air conditioners, gas furnaces, heat pumps and mini-split systems, including the Merit and Elite furnace families and the XC and SL condenser lines. If you’re unsure what you have, the model plate on the outdoor unit or inside the furnace cabinet tells us.
Proper service doesn’t void a Lennox warranty, but how the equipment is treated matters. We document our findings and follow warranty-safe practices so a compressor or heat exchanger claim isn’t undermined later. Call (866) 982-5097 with your model information and we’ll walk you through what applies.
Repair and installation costs in Pasadena depend on the work. Typical estimated ranges:
| Service | Typical Estimated Cost |
|---|---|
| AC Repair | $150 – $650 |
| Furnace Repair | $150 – $700 |
| AC Installation | $3,500 – $7,500 |
| Tune-Up | $80 – $200 |
These are typical estimates, and the written estimate sets the final price. Call (866) 982-5097 for an exact quote. Estimates are free.
Usually something else. A tripping pressure switch on a Merit or Elite furnace most often traces to a failing inducer motor, a blocked flue or a clogged condensate drain, and a technician confirms which with a manometer reading. Replacing the switch without finding the cause produces a callback. Call (866) 982-5097 for a free estimate.
Sometimes, but often not. On an older Merit unit that’s already had major work, a leaking coil combined with a tired compressor usually points toward replacement. On newer equipment a coil repair still makes sense. We’ll give you the honest read on your equipment. Call (866) 982-5097.
Yes. A heat pump runs year-round and needs its reversing valve, defrost cycle and both heating and cooling charge checked, not just the cooling side. Pasadena’s mild winters mean the heating side gets plenty of run time too. Call (866) 982-5097 to schedule a system check.
Ice on an indoor mini-split head almost always means restricted airflow or a low refrigerant charge. Clogged filters, a dirty coil or a blower issue will do it, and so will a slow leak. Gulf Coast humidity makes the coil side worse when airflow is restricted. Call (866) 982-5097 for a diagnosis.
Book Your Lennox Service in Pasadena, TX
Whether your Lennox condenser stopped cooling in the middle of a Pasadena summer or your furnace is tripping out, we’ll diagnose it and tell you what it actually needs. Free estimates, upfront pricing, and a written report on what we found. Call (866) 982-5097. We answer 24/7, with fast dispatch from 7am to 7pm, Sunday through Friday.
Written by the team at Paragon AC Repair.